The glue gun TR 55 LCD works with hot-melt glues of high and low viscosities in granulate and stick forms.
Description
The hot-melt adhesive is applied through air pressure. Pneumatic glue guns increase work speed and simplify exact dosing of the glue.
Thanks to the built in electronic temperature regulation the glue gun is ready to work within 3 to 10 minutes. Furthermore, it keeps the temperature on a constant level thus is a perfect suit for processing temperature-sensitive hot-melt glue. A LCD-display and push-buttons allow a precise temperature adjustment. This way, the user always knows the current temperature of the glue applicator and is able to apply the glue at the intended temperature.
The glue gun TR 55 LCD can be loaded with granulate, pillows and 43 mm slugs. It offers maximum flexibility for choosing the right glue and lets you benefit from cost-advantages of different shapes of hot-melt.
The notably large capacity of 330 ml allows continuous work for a long time.
The number of possible application patterns is widely extended by the Reka nozzle range. Almost all of the offered nozzles can be used with every Reka glue gun in combination with a separate adapter.
| Weight applicator |
1400 g |
| Power connection |
230 V (50 Hz), 2,6 A / 120 V (60 Hz), 3,3 A |
| Power consumption |
230 V: 600 Watt / 120 V: 400 Watt |
| Protection class |
I, IP 30 |
| Temperature control, display |
Electronic, digital |
| Temperature limitation |
Temperatur monitor |
| Operating temperature |
50-210°C |
| Temperature constancy |
± 2 °C |
| Heat-up time |
ca. 3 – 10 min. |
| Gross capacity |
330 ml |
| Conveyor system |
Air pressure |
| Operating pressure |
0,5 – 6 bar |
| Length of electrical connection |
8,5 m |
| Air hose length |
5 m |
| Length connection set |
3 m |
| Recommended melting goods |
Hot-melt granules, pillows, 43mm sticks |
